www.graspego.com

  • Can't approach the underneath or other parts of the object being held ?
  • Looking to avoid time-consuming setups / transitions during your workholding ?
  • Must protect parts against problematic vertical pressure ?

Graspego Hold-Down

Use the innovative hold-down tool GRASPEGO-R50/C50:

a) to achieve the best ergonomics for your workspace

b) to allow rapid transition between the different positions of gripping

c) to protect the narrow/pointed/protruding/fragile parts of your workpiece

d) to hold tight "vertical objects" that are most challenging or impossible to

grip otherwise

< Videos & Tutorials >

The R50 holds both above and/or below objects while simultaneously providing you with:

  • convenient space on your work surface
  • superior stability achieved in seconds
  • complete protection

which is for any shape or part of your project.

  • You can easily plan more frequent transitions/setups rather than trying to combine into one position several steps of processing that basically require different way of holding.

Can workholding become both effective & enjoyable ?

 It can ! ... with GRASPEGO-R50/C50 you can focus on your real work !

  • As is well-known, the contribution of hold-down tools cannot be underestimated.  They are an important addition in many projects frequently used for getting high stability and reducing unnecessary risks.
  • But when a basic requirement from a workspace is to allow you much more flexibility and efficiency during the project, that is, to shift between positions without hesitation, to conveniently access any point or to space the object from the work surface itself, then the R50/C50 is a unique, innovative and a powerful hold-down tool that functions also as a "hold-below" solution to allow an upwards clamping of any shape.
  • It blends perfectly into the action of   Graspego with WORKBENCHES

Read the links below to better understand how GRASPEGO-R50/C50 protects your workpieces

1) How can the R50/C50 help to protect your workpiece ?

2) How does the R50 overcome this limitation of push clamps ?

  Can it result in less time for a job?

  • We always look for the best position of a workpiece for easier access during its processing.  But the immediate next questions are:  can it be implemented?  how long the setup will take each time?  GRASPEGO-R50/C50 provides you with an amazing flexibility to choose unusual ways to hold any object - from the sides, from the top, from below or when it's tilted - just change the R50/C50 position back and forth with minimal time & effort, therefore your transitions between setups become faster and easier.
  • Use the R50 as "hold-below" solution in any point of your work surface - in the middle or close to its edge.
  • You can re-adjust easily and continuously the gripping interface and the relative angles between your object and the R50's innovative grip.
  • Thanks to its standalone and simple hold-down operation, the R50/C50 saves you unnecessary, cumbersome, time-consuming improvisations. Using the right tools allows you a method of more setups but simpler actions in less time to finish the job.

   Effective + Enjoyable =  Perfected Workholding

Changing the rules of hold-down clamping

GRASPEGO-R50/C50

The ultimate Hold-down tool to any challenging vertical clamping

< Videos & Tutorials >

How to deal with the main conflict of workholding?

  • If your purpose is to find as few points as possible to get a solid grip, well...depending on the workspace, the object itself and in the type of work you need to perform, quiet often this purpose become a complicated task.
  • Meaning, it's a technical-ergonomic  conflict to maintain the level of stability that's required for a job but with minimum gripping points while allowing maximum free access to your workpiece.
  •  The R50/C50 is an ultimate tool to eliminate this conflict:  it can act as a single point of vertical clamping with close to 100% free access to any part of your object.
  • With the R50/C50 you can choose any point in your setup to be the anchor of the grip: parts that are impossible-to-grip with traditional clamping tools suddenly become completely possible as ergonomic - time saving - high stability holding points.
  • The GRASPEGO-R50/C50 is your 4th dimension of workholding !