www.graspego.com

  •  Missing a final but critical direction for effective clamping on your work surface ?
  •  Need to control your spreaders' / push-clamps' pressure with high precision?

Graspego for Push-clamping

  • In addition to its innovative advantages in other implementations the GRASPEGO-R50/C50  also enhances your push-clamping  device.
  • Achieve incredibly high stability while relying far less on push-clamps' pressure

< Videos & Tutorials >

When to use GRASPEGO-R50/C50  for push clamping?

  • If we think of workholding setup in a typical project with an open mind, literally from a different perspective, we'll realize that in many cases it would be more effective and valuable to clamp a workpiece by pushing it from a non-standard direction - even if the contact point is a very challenging shape/part.  You might think it's impossible, but this is exactly where the R50/C50 will make a huge difference versus standard push clamps and bar-clamp spreaders.
  • While using  Graspego with BAR Clamps , no matter what the clamping driver is, with the GRASPEGO-R50/C50 you can always have the perfect grip with minimum effort in any direction required!
  • You will gain outstanding flexibility of endless gripping options and directions that will significantly improve the operation of your work surface, as well as the action of  common bar clamps when used as spreader clamps and other tools designed for push-clamping.
GRASPEGO-R50/C50 The perfect tool for Push-clamping & Spreaders applications
  • The GRASPEGO-R50 works perfectly with the GRASPEGO-B60 and spreader bar-clamps as shown above and as presented for  Graspego with WORKBENCHES  and  Graspego with CLAMPING TABLES
  • If using a workbench without peg holes, replace the GRASPEGO-B60 with another element to anchor the pushing operation.

 Why can the push-clamping be difficult to control ?

  • Push-clamps/spreaders are perfect to use with wide or complex objects, or when a repetitive job with many transitions is part of the project.  In some situations, an internal pressure is already applied on the workpiece before closing the last spreader/push-clamp of your setup.
  • Adding slightly more pressure than your object can bear leads to cracks and damage especially with fragile objects or those comprised of few parts.

How does the R50 overcome this limitation of push clamps ?

  • As described for Graspego with BAR Clamps and for   Graspego Hold-down the R50 has its unique innovative ability to adjust to any shape while allowing you to sense the amount of pressure you need and really feel in your hands when your workpiece has reached a completely stabilized position.
  • With GRASPEGO-R50 you will perform the final tightening with better control and  protection for any object at any step of your project